ISO 14001: 2004
ISO 9001: 2008

PA Series

Bright Brilliant Beautiful

A formaldehyde-free, high strength, economical polyester based fluorescent colorants recommended for master batch manufacturer and other general- purpose plastic applications.

Customer Benefits – Made possible by Flamingo PA Series:

  • Easy to handle and use: Improved moisture resistance to prevent agglomeration.
  • Clearer, brighter and stronger shades: New Proprietary polyester based chemistry to deliver bright, brilliant and beautiful colors.
  • Faster processing and clean up: Excellent dispersion and substantially reduced plate out to ensure ease of processing and color change overs.
  • Better Thermal Stability: wide processing range from 120°C to 250°C with minimal color change,including dim en 12877-2 standard compliance up to 240°c.
  • Enhance color consistency and surface finish quantity of articles: New proprietary chemistry to deliver best end product results.

Available colors:

Colors Product code
Yellow PA-11
Green PA-12
Orange PA-14
Orange (y) PA-14
Orange (R) PA-14
Red PA-16
Pink PA-17
Pink (R) PA-17
Magenta PA-18
Magenta (B) PA-18
Violet PA-19
Blue PA-20

Applications – Processes:

Suitable Limited Suitability
Masterbatch Blow Mouldings
Mouldings & Extrusions Liquid Colorants

Applications – Polymers:

Suitable Limited Suitability

Typical Pigment Characteristics:

Properties Values
Average particle size Coarse powder
Melting point 80°C - 90°C
Decomposition Point** 260°C
Min, Processing Temp 120°C
Maximum recommended processing temperature (For short dwell times) < 250°C
Chemical Nature Formaldehyde free thermoplastic polyamide resin

Shelf & Storage Conditions:

  • Store at dry and closed conditions.
  • Keep away from source of ignition/sunlight.
  • Avoid moisture and raising dust.


  • Please refer to our material safety Data Sheet.
  • **-maximum temp. at which fluorescence is maintained.
  • Color degradation is time/temperature dependent

PA Pigments are a solid solution of thermoplastic polyester resin with fluorescent dyes. minimum processing temperature to ensure complete development is 120°C

Regulatory compliance:

  • TSCA
  • EN71-3, 2013
  • ROHS
  • ASTM D 4236

Please check with us for any regulatory requirement not already listed above

Other information:

PA fluorescent series are much brighter than conventional non-fluorescent colors.

Opacity can be improved, if necessary, by small additions of rutile titanium dioxide. The fluorescent color will become more pastel as the quantity of titanium dioxide is increased.

PA series offers limited light fastness on exterior exposure. To enhance lightfastness, optimal pigment loading & UV stabilizers could be used.

To obtain maximum colour and brightness it is important to use sufficient pigment. The quantity used will depend upon the thickness of the plastic product.

Disclaimer: Technical information, advice, statements, verbal and written suggestions and test results are offered for guidance only and it is believed to be reliable based on our present knowledge. There are not to be construed as a warranty for which we assume no responsibility. It is responsibility of the user to ensure their employee are aware of the content and also to ensure that any additional regulations are satisfied.
NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE MADE. Users are responsible for testing our products and suggestions to ensure that they are suitable for the intend purpose and application prior to use

Copyright © Aron Universal Limited
powered by MARS Web Solution