ISO 14001: 2004
ISO 9001: 2008

CP Series

Bright Brilliant Beautiful

A formaldehyde-free, economical high-value performance, fluorescent colorants based on copolymer technology, Recommended for masterbatch manufacture and general purpose plastic use.

Customer Benefits- Made possible by flamingo CP Series:

  • Economical high-value performance: New proprietary copolymer based technology.
  • Easy to disperse at low temperature starting from 160°C: Low temperature melting property of colorants.
  • Faster processing and clean up: Excellent dispersion and flow along with minimal or no plate out to ensure ease of processing and color change overs.
  • Better Thermal Stability: Wide Processing range from 160°c to 280°C with minimal color change, including DIN EN 12877-2 Standard compliance up to 260°C.
  • Brighter shades with enhanced color consistency : New proprietary chemistry to deliver consistent bright-brilliant-beautiful colors.

Available colors:

Colors Product code
Yellow CP-11
Green CP-12
Chrome CP-13
Orange CP-14
Red Orange CP-15

Applications – Processes:

Suitable Limited Suitability
Masterbatch Liquid Colorants
Mouldings & Extrusions Vinyl Plastisols
Blow Mouldings Vinyl Calendared Film Powder Coatings

Applications – Polymers:

Suitable Limited Suitability
PP Polycarbonate
GPPS Acetal
HIPS EVA & Rubber
Acrylic Nylon 6 Cellulose Acetate

Typical Pigment Characteristics:

Properties Values
Average particle size 4-6µ
Melting point 120°C - 130°C
Decomposition Point** 280°C
Min, Processing Temp 160°C
Maximum recommended processing temperature (For short dwell times) < 270°C
Chemical Nature Formaldehyde free thermoplastic polyamide /polyester resin

Shelf & Storage Conditions:

  • Store at dry and closed conditions.
  • Keep away from source of ignition/sunlight.
  • Avoid moisture and raising dust.


  • Please refer to our material safety Data Sheet.
  • **-maximum temp. at which fluorescence is maintained.
  • Color degradation is time/temperature dependent

CP Pigments are a solid solution of hybrid co polymer resin with fluorescent dyes. Minimum processing temperature to ensure complete colour development is 160°C

Regulatory compliance:

  • TSCA
  • AP 89(1)
  • ROHS
  • ASTM D 4236
  • EN71-3, 2013

Other information:

CP fluorescent series are much brighter than conventional non-fluorescent colors.

Opacity can be improved, if necessary, by small additions of rutile titanium dioxide. The fluorescent color will become more pastel as the quantity of titanium dioxide is increased.

CP series offers limited light fastness on exterior exposure. To enhance lightfastness, optimal pigment loading & UV Stabilizers could be used.

To obtain maximum colour and brightness it is important to use sufficient pigment. The quantity used will depend upon the thickness of the plastic product.

Disclaimer: Technical information, advice, statements, verbal and written suggestions and test results are offered for guidance only and it is believed to be reliable based on our present knowledge. There are not to be construed as a warranty for which we assume no responsibility. It is responsibility of the user to ensure their employee are aware of the content and also to ensure that any additional regulations are satisfied.
NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE MADE. Users are responsible for testing our products and suggestions to ensure that they are suitable for the intend purpose and application prior to use

Copyright © Aron Universal Limited
powered by MARS Web Solution